A typical roof is made up of many components, and the terns can be a bit confusing for the homeowner, with things like flashing, soffit and fascia, to name but a few. If you would like to better understand the major components of a roof, here is a brief description of the various parts of a roof.
- Flashing – Typically made from lead, the flashing covers areas where different materials meet, such as the chimney line and where one section of roof butts up to another. Galvanised steel can also be used for roof flashing, something that roofers in Dudley would readily confirm.
- Fascia – Either timber or a composite, the fascia sits on the last row of roof tiles and provides a weather protection, while also making the roof more visually appealing.
- Soffit Board – Again, timber or composite, the soffit is used to cover the underside of the fascia, and would be cut to fit. The overhanging underside of a ceiling would be covered with soffit board to give the roof a balanced look, while also offering essential protection for the roof interior.
- Guttering and Downpipes – The guttering provides an escape channel for rainwater, which eventually leads to downpipes that take the water down to the ground level and into the drainage system. Stainless steel is an ideal material for guttering, which should be both wide and shallow, as there is less chance of a blockage with this type of design.
Once you are familiar with these terms and understand what each item does, you will have a clearer understanding of the major components of a roof.